Studio quality 3D printed pottery tools that can be used by anyone with any skill level.
Designed and Made by Karleigh & Anthony
MoonMoon Ceramics
Pottery Tools
Meet the
Artist
Karleigh Thompson
Karleigh creates organically sculpted forms with celestial inspired textures and colors.
Featured Artwork
Full moon wall sculpture.
Made of white stoneware clay, stained black to show the textured and moon craters.
Size 10" wide by 3.5" deep with drainage hole
Moon comes strung with stainless steel cable to hang it.
Weight - 3lbs
Hand sculpted ceramic paint palette with organic rim and deep paint wells. Can be used for watercolor, gouache, face paint or acrylic paint. Larger well size is perfect for color mixing, blending or filling the well with water to make a wash.
One of a kind palette with 25 paint wells. Hand wash with soft sponge. Bottom of palette has cork feet to keep palette from sliding around your desk.
Size 17.5" x 7.5" (at the two widest points)
Made of white stoneware clay and glazed in snow glossy white, tiny specs in the clay show through the glaze giving it a natural look.
Ready to Ship
One of a kind aurora planter crafted from white stoneware clay. This stunning planter features a beautifully glazed surface that resembles the aurora borealis.
Size is 10.5" wide x 11" tall at the tallest point in the rim
( 5" of planting depth)
Large ceramic moon serving dish.
The outside of this stunning serving dish has been hand sculpted to look like the surface of a moon. Bottom texture is cratered and made to look like moon rocks. The rim of the bowl is organic and wavy. It has been glazed in a dark grey magma that is a rough rocky texture. The inside of the bowl is glazed in dark matte black with flecks of silver moon dust.
Made of white stoneware, stained black outside and inside is glazed in matte black.
Size 13” wide x 3-3.5” deep
STUDIO QUALITY
POTTERY TOOLS
Garden marker clay cutter made for cutting out slab rolled clay. This pottery tool will help you quickly cut out uniform garden markers from slabs of clay. 3D printed with durable, lightweight and waterproof PLA+ plastic. All sizes fit with our herb stamps. New tiny size is designed for making extra small seed starting garden labels. we recommend using the 1/4” or 1/2” size stamps with the tiny garden marker cutter for a better fit.
Tiny 4” x .75" wide (intended for seed starting trays)
Small 6" x .75" wide
Medium 8.5” x .75” wide
Large 10.5" x 1" wide
Check out our herb stamps to pair with the garden marker clay cutter.
Care Instructions- clean with wet sponge or wash directly in the sink. Dry before using.
Directions: I recommend stamping your herb names in your clay before cutting it out with the garden marker clay cutter. This helps with keeping your herb letters straight. Cutting out stamp the back with your logo and dry slowly under plastic to avoid warping.
Warning - HEAT SENSITIVE. Do not leave in a hot car or hot pottery shed. Will warp under high temperatures. Not recommended to use with a heat gun.
Clay Circle Cutting Set Pottery Tool
This set is one of my favorite tools and is by far the most used in my studio. It hangs neatly out of the way on the wall above my slab roller.
These clay circle cutters are a large set of clay cutters "cookie cutter" designed specifically for clay. This set includes circle sizes 1" through 10" and custom holding case to keep sizes organized. Custom holding case has a magnetic arm for holding the circle cutters in. The circle clay cutters are light weight, durable and easy to clean. Each circle cutter is 7/8" tall for cutting thicker clay. They have a rounded wall radius that adds cutting strength and allows your clay to easily unstick from its surface, compared to traditional metal cookie cutters that clay loves to stick to. The variety of sizes makes cutting out bowls and plates so easy.
These clay cutters are 3D printed in a rainbow and white PLA+ filament which gives them a semi-nonstick surface. Circle clay cutter sizes 1"-8" has the size printed into the top each ring for easy identification, sizes 9" and 10" are unmarked with their size.
PLA+ isn’t to be confused with traditional PLA filament. PLA+ is stronger than traditional PLA, and bonds much stronger between layers. This helps eliminate cracking, splitting, and breaking commonly found in PLA.
Care Instructions-Wipe clean with a sponge
Sizes include
1", 2", 3", 4", 5", 6", 7", 8", 9" and 10"
Designed for clay
Warning- Heat sensitive - DO NOT LEAVE IN HOT CAR!
BUTTER TOOL
STAMPS MADE FOR CLAY
HERB STAMPS
These fun herb stamps are 3/4” font size with letter depth of 4 millimeters for deep clear impressions. The extra depth of the letters allow for both shallow and deep impressions depending on your style and needs. These stamps were designed to make modern ceramic herb markers & labels for gardening but can be used however you want! The 3/4" size stamp is perfect for making larger 3/4"-1" wide herb markers. These herb stamps were designed to be used directly with our large garden marker clay cutter. Other projects include herb labels for starting seeds indoors or stamping herb names onto planters.
All of our stamps are printed to order to ensure superior quality prints. Each stamp has the herb name printed into the top of the handle for easy identification and quick stamp orientation. No need to flip stamps over and read everything backwards trying to decipher each name.
Sizes of the Stamps
Approximate lengths- Basil is 1 3/8”, Rosemary is 2 3/4”, Lemon Balm is 3 1/2”
Large 3/4" Font Size
Our stamps are 3D printed using premium PLA+ filament. Each stamp was hand drawn, then made into a 3D model using 3D modeling software. The model is then printed into a physical object using our own 3D printers. The 3D software separates the 3D design into .08-.2mm layers and prints the stamp layer by layer, fusing them together at 400°F.
When using our stamps you get a unique quality of a handmade stamp that was designed by a potter for potters, along with the benefits of using a material like PLA+. Our PLA+ stamps are made extremely durable for continual use, they are light weight and have sharp detail.
PLA+ isn’t to be confused with traditional PLA filament. PLA+ is 5-8x stronger than traditional PLA, and bonds much stronger between layers. This helps eliminate cracking, splitting, and breaking commonly found in PLA, along with added strength on finer detail, which dramatically increases stamping quality and the life of the stamp. These stamps are designed to last years of use and continual stamping.
Standard PLA is technically known as polylactic acid in the science world. It’s a thermoplastic polymer which is made from either sugar cane or corn starch. PLA is considered a good material to use because it is made from renewable resources. Our stamps are eco friendly and can be recycled.
Our stamps can be used on a wide variety of surface materials. Such as clay, polymer clay, fondant, and soaps. Using stamps can greatly enhance your work by adding interesting textures and the differing depths. This texture creates perfect channels and valleys to collect glaze.
Care Instructions - wipe with dampe sponge or wash directly in water. If needed use a soft bristle brush to clean debris out of stamp. Gently pat dray and allow to air dry for 30 minutes before attempting to use.
Warning - HEAT SENSITIVE. Do not leave in a hot car or hot pottery shed. Will melt under high temperatures. Not recommended to use with a heat gun.
Shipping is 1-2 weeks. All pottery tools are made to order to ensure we are providing premium quality tools. 3D Printing in small batches helps reduce waste, limits overstocking and frees up space in our small home studio.
Basil
Bay Leaf
Bergamot
Calendula
Cannabis
Catnip
Chamomile
Chervil
Chives
Cilantro
Coriander
Curry
Dill
Fennel
Garlic
Ginger
Green onions
Lavender
Lemon balm
Lemon thyme
lemon verbena
Lemongrass
Marjoram
Mint
Mustard
Nasturtium
Onion
Oregano
Parsley
Peppermint
Rosemary
Safflower
Sage
Savory
Spearmint
Stevia
Tarragon
Thyme
Turmeric
POTTERY PUCKS
Our pottery pucks are a double sided drape forms. One tool with two unique forms for creating nesting dinnerware.
Shrooms Puck double sided pottery drape forms
Drape form shape the "Shroom" pottery puck which has a rounded mushroom top and narrowed angular bottom.
Our 3D printed pottery pucks come in 4 different designs and are available in sizes 1"-16". The three different pottery pucks drape form designs are Classic, Krispy, Nest and Shroom. Each double sided pottery puck has a unique top and bottom shape. These different forms allow you to create varying sized nesting plates and bowls using one tool.
Our tools are designed to be functional and durable pottery forms that can be reused over and over. Other projects include varying sized plates, bowls, pet dishes, hanging planters, and sculptural forms.
These pottery pucks are durable, lightweight, waterproof and can easily be cleaned with a damp sponge. Designed to be used with slab building, pressing forms into foam like an anvil or sculptural hand building.
(diameter x height)
1" x .5", 2" x 1", 3" x 1.5", 4" x 2", 6" x 3", 8" x 4", 10" x 5", 12” x 6”, 14” x 7”
Materials - 3D printed in PLA+ plastic. These forms have a light layer line 3D printed texture on the surface that leaves a slight texture on your clay that can easily be smoothed out with a sponge or rib. If your form is damaged with a scuffed or scratched from normal usage you can lightly wet sand the surface back to smooth starting with 60, 80, 120 grit sand paper working your way to finer 400-600 girt for a super smooth finish.
Clay Tips - For quick release of your clay from your mold use a barrier in-between your clay and pottery from. Such as doubled up plastic. thin cotton fabric, or corn starch. If using corn starch as a release agent make sure to wash your bisque ware before glazing. *Pro Clay Tip- I like to put painters tape tabs on my pucks creating little pull tables so I can easily remove them from my clay.
Directions - I have been using and perfecting my pottery forms for years. This is my method I have found to be successful. I like to slab roll out my clay, smooth and cut out to the size I want, then I drape thin plastic on my pottery form. Next I drape my clay onto my pottery form with the plastic on it. Starting from the center I then working the clay into the form using a red rib or damp sponge. Allow clay to stiffen up to desired dryness before flipping then remove drape form from clay. The peel off plastic, smooth with sponge or red rib if desired then dry slowly under plastic. Do not let your clay dry completely on the form even over night, it will shrink and crack your piece.
Care Instructions- clean with wet sponge or wash directly in the sink. Dry before using.
Warning - HEAT SENSITIVE. **Do not leave in a hot car or hot pottery shed. Will melt under high temperatures. Not recommended to use with a heat gun.
Shipping is 1-2 weeks. All pottery tools are made to order to ensure we are providing premium quality tools. 3D Printing in small batches helps reduce waste, limits overstocking and frees up space in our small home studio.
Classic double sided pottery drape form
This drape form shape is the "Classic" pottery puck which has a rounded top and short angular bottom.
Our 3D printed pottery pucks come in a variety of different designs and are available in sizes 1"-10". Each double sided pottery puck has a unique top and bottom shape. These different forms allow you to create varying sized nesting plates and bowls using one tool.
Our tools are designed to be functional and durable pottery forms that can be reused over and over. Other projects include varying sized plates, bowls, pet dishes, hanging planters, and sculptural forms.
These pottery pucks are durable, lightweight, waterproof and can easily be cleaned with a damp sponge. Designed to be used with slab building, pressing forms into foam like an anvil or sculptural hand building.
(diameter x height)
1” x .5”, 2” x 1”, 3 × 1.5”, 4” x 2”, 6” x 3”, 8” x 4”, 10" x 5"
Materials - 3D printed in PLA+ plastic. These forms have a light layer line 3D printed texture on the surface that leaves a slight texture on your clay that can easily be smoothed out with a sponge or rib. If your form is damaged with a scuffed or scratched from normal usage you can lightly wet sand the surface back to smooth starting with 60, 80, 120 grit sand paper working your way to finer 400-600 girt for a super smooth finish.
Clay Tips - For quick release of your clay from your mold use a barrier in-between your clay and pottery from. Such as doubled up plastic. thin cotton fabric, or corn starch. If using corn starch as a release agent make sure to wash your bisque ware before glazing. *Pro Clay Tip- I like to put painters tape tabs on my pucks creating little pull tables so I can easily remove them from my clay.
Directions - I have been using and perfecting my pottery forms for years. This is my method I have found to be successful. I like to slab roll out my clay, smooth and cut out to the size I want, then I drape thin plastic on my pottery form. Next I drape my clay onto my pottery form with the plastic on it. Starting from the center I then working the clay into the form using a red rib or damp sponge. Allow clay to stiffen up to desired dryness before flipping then remove drape form from clay. The peel off plastic, smooth with sponge or red rib if desired then dry slowly under plastic. Do not let your clay dry completely on the form even over night, it will shrink and crack your piece.
Care Instructions- clean with wet sponge or wash directly in the sink. Dry before using.
Warning - HEAT SENSITIVE. **Do not leave in a hot car or hot pottery shed. Will melt under high temperatures. Not recommended to use with a heat gun.
Shipping is 1-2 weeks. All pottery tools are made to order to ensure we are providing premium quality tools. 3D Printing in small batches helps reduce waste, limits overstocking and frees up space in our small home studio.
Krispy Puck double sided pottery drape forms
Drape form shape the "Krispy" pottery puck has a rounded angular top and sharp angular bottom.
Our 3D printed pottery pucks come in 3 different designs and are available in sizes 1"-10". The three different pottery pucks drape form designs are Classic, Krispy and Shroom. Each double sided pottery puck has a unique top and bottom shape. These different forms allow you to create varying sized nesting plates and bowls using one tool.
Our tools are designed to be functional and durable pottery forms that can be reused over and over. Other projects include varying sized plates, bowls, pet dishes, hanging planters, and sculptural forms.
These pottery pucks are durable, lightweight, waterproof and can easily be cleaned with a damp sponge. Designed to be used with slab building, pressing forms into foam like an anvil or sculptural hand building.
(diameter x height)
1" x .5", 2" x 1", 3" x 1.5", 4" x 2", 6" x 3", 8" x 4", 10" x 5"
Materials - 3D printed in PLA+ plastic. These forms have a light layer line 3D printed texture on the surface that leaves a slight texture on your clay that can easily be smoothed out with a sponge or rib. If your form is damaged with a scuffed or scratched from normal usage you can lightly wet sand the surface back to smooth starting with 60, 80, 120 grit sand paper working your way to finer 400-600 girt for a super smooth finish.
Clay Tips - For quick release of your clay from your mold use a barrier in-between your clay and pottery from. Such as doubled up plastic. thin cotton fabric, or corn starch. If using corn starch as a release agent make sure to wash your bisque ware before glazing. *Pro Clay Tip- I like to put painters tape tabs on my pucks creating little pull tables so I can easily remove them from my clay.
Directions - I have been using and perfecting my pottery forms for years. This is my method I have found to be successful. I like to slab roll out my clay, smooth and cut out to the size I want, then I drape thin plastic on my pottery form. Next I drape my clay onto my pottery form with the plastic on it. Starting from the center I then working the clay into the form using a red rib or damp sponge. Allow clay to stiffen up to desired dryness before flipping then remove drape form from clay. The peel off plastic, smooth with sponge or red rib if desired then dry slowly under plastic. Do not let your clay dry completely on the form even over night, it will shrink and crack your piece.
Care Instructions- clean with wet sponge or wash directly in the sink. Dry before using.
Warning - HEAT SENSITIVE. **Do not leave in a hot car or hot pottery shed. Will melt under high temperatures. Not recommended to use with a heat gun.
Shipping is 1-2 weeks. All pottery tools are made to order to ensure we are providing premium quality tools. 3D Printing in small batches helps reduce waste, limits overstocking and frees up space in our small home studio.
Nest Puck double sided pottery drape forms
Drape form shape has a tapered top and flat bottom. Designed to create nesting pottery.
Our 3D printed pottery pucks come in 3 different designs and are available in sizes 1"-10". The three different pottery pucks drape form designs are Classic, Krispy and Shroom. Each double sided pottery puck has a unique top and bottom shape. These different forms allow you to create varying sized nesting plates and bowls using one tool.
Our tools are designed to be functional and durable pottery forms that can be reused over and over. Other projects include varying sized plates, bowls, pet dishes, hanging planters, and sculptural forms.
These pottery pucks are durable, lightweight, waterproof and can easily be cleaned with a damp sponge. They are designed to be used with slab building, pressing forms into foam like an anvil, or sculptural hand building.
(diameter x height)
1" x .5"
2" x 1"
3" x 2" (Top diameter 2.5")
4" x 2.75" (Top diameter 3.25")
6" x 4" (Top diameter 5")
8" x 5.5" Top diameter 6.5"
10" x 7" Top diameter 8"
Materials - 3D printed in PLA+ plastic. These forms have a light layer line 3D printed texture on the surface that leaves a slight texture on your clay that can easily be smoothed out with a sponge or rib. If your form is damaged with a scuffed or scratched from normal usage you can lightly wet sand the surface back to smooth starting with 60, 80, 120 grit sand paper working your way to finer 400-600 girt for a super smooth finish.
Clay Tips - For quick release of your clay from your mold, use a barrier in between your clay and pottery from such as doubled up plastic, thin cotton fabric, or corn starch. If using corn starch as a release agent make sure to wash your bisque ware before glazing. *Pro Clay Tip- I like to put painters tape tabs on my pucks creating little pull tabs so I can easily remove them from my clay.
Directions - I have been using and perfecting my pottery forms for years. This is my method I have found to be successful. I like to slab roll out my clay, smooth and cut out to the size I want, then I drape thin plastic on my pottery form. Next I drape my clay onto my pottery form with the plastic on it. Starting from the center I then work the clay into the form using a red rib or damp sponge. Allow clay to stiffen up to desired dryness before flipping then remove drape form from clay. Then, peel off the plastic, smooth with sponge or red rib if desired then dry slowly under plastic. Do not let your clay dry completely on the form even over night, it will shrink and crack your piece.
Care Instructions- Clean with wet sponge or wash directly in the sink. Dry before using.
Warning - HEAT SENSITIVE. **Do not leave in a hot car or hot pottery shed. Will melt under high temperatures. Not recommended to use with a heat gun.
Custom
Logo stamps
3D PRINTING SERVICES
Custom 3D Printed Stamp for Potters Made by Potters
This listing is for one custom 3D printed stamp to be used in clay. We can make signature stamps, logos, artist stamps, mug medallions, etc. If you need help designing your logo or your digital file needs significant edits this is a fee that we charge separately. After purchasing please send your logo or image to my email moonmoonceramics@gmail.com with your order number. Acceptable file format to send; .af, jpeg, png, svg, or psd.
Please message me if you have any questions at all about purchasing a custom stamp. If you are looking to purchase different size stamps of the same design/logo then please reach out to us and we will provided you with a better price quote based on your order. Stamps take approximately 1-3 weeks to make and print.
If your image is very detailed we will try our best to print your stamp but in rare cases we will inform you if we are unable to and offer a full refund.
What size do I pick?
Select the longest side of your logo for your stamp size. As a example if your logo is 2"x3" rectangular shape then please select the 3"x3" listing to purchase.
*don't forget clay shrinks so your final logo will be 10-15% smaller after firing depending on the clay you use, So if the final fired piece needs to be a specific size we can work with you on finding the perfect size stamp to fit your clay body.
How do we make your stamps?
Our stamps are 3D printed using premium PLA+ filament. Digitally converted, then made into a 3D model using 3D modeling software. The model is then printed into a physical object using our own 3D printers. The 3D software separates the 3D design into .08-.2mm layers and prints the stamp layer by layer, fusing them together at 400°F.
When using our stamps you get a unique quality of a handmade stamp that was designed by a potter for potters, along with the benefits of using a material like PLA+. Our PLA+ stamps are made extremely durable for continual use, they are light weight and have sharp detail.
WARNING -heat sensitive! Don’t use with a heat gun. Do not leave inside a hot car or hot pottery shed.
What surfaces can I use the stamp on?
Our stamps can be used on a wide variety of surface materials. Such as clay, polymer clay, fondant, and cookies. Using stamps can greatly enhance your work by adding interesting textures and the differing depths. This texture creates perfect channels and valleys to collect glaze.
Care Instructions & Use
Wash gently with soap and water. If needed, use a soft bristle brush to clean debris out of the stamp. Gently pat dry and allow to air dry for 30 minutes before attempting to use. If it is wet it could stick to your clay. It's best to stamp clay that has stiffened up a bit but if needed cornstarch is my favorite release agent to use when stamping wet-moist clay. I use a small fan brush to dust the surface of my clay and dust my stamp. Then the cornstarch burns out in your bisque firing. Wipe or wash bisqueware pieces if you used cornstarch before glazing to remove any micro dust.
We have many different colors of PLA+ for special color stamps message me for options!
Custom 3D Printed Stamps for Potters Made by a Potter
This listing is for a set of custom alphabet stamps with a holding case. You get to pick the custom font that will be made into your stamp set but please make sure this is an open source font. Some fonts can be protected by design patent and may be protected by copyright. as an add on we can purchase the rights to use commercial fonts if needed.
Letters are printed with a 3-4.5mm stamping depth. This set is priced for 26 letter (26 individual stamps). For alphabets containing a different number of letters please message me for a quote.
After purchasing please send your font to my email moonmoonceramics@gmail.com with your order number. Acceptable file format to send; jpeg, png, svg, or psd.
Please message me if you have any questions at all about purchasing a custom stamp set. If you are looking to purchase different size stamps of the same font then please reach out to us and we will provided you with a better price quote based on your order. Stamps sets take approximately 2-3 weeks to make and print.
*don't forget clay shrinks so your final stamp will be 10-15% smaller after firing depending on the clay you use, so if the final fired piece needs to be a specific size we can work with you on finding the perfect size stamp to fit your clay body.
How do we make your stamps?
Our stamps are 3D printed using premium PLA+ filament. Digitally converted, then made into a 3D model using 3D modeling software. The model is then printed into a physical object using our own 3D printers. The 3D software separates the 3D design into .08-.2mm layers and prints the stamp layer by layer, fusing them together at 400°F.
When using our stamps you get a unique quality of a handmade stamp that was designed by a potter for potters, along with the benefits of using a material like PLA+. Our PLA+ stamps are made extremely durable for continual use, they are light weight and have sharp detail.
